Product news

The brake of casters can be divided into three types according to their functions: brake wheel, brake direction and double brake. a. Brake wheel: It is easy to understand the device that is install...

1. Support maintenance: if the movable steering is too loose, it must be replaced immediately. If the caster center rivet is fixed by nut, it must be firmly locked. If the movable steering cannot r...

1. The polyurethane wheel is relatively soft, with good friction resistance and low noise; The nylon wheel is relatively hard, and its friction resistance is slightly different from that of polyure...

Key points of selection and feature selection When purchasing rubber wheels, pay attention to the following points: 1. The weight of the wheels should be greater than this weight, increasing the se...

The ferrule type pipe joint is composed of three parts: joint body, ferrule and nut. When the ferrule and nut sleeve are inserted into the joint body on the steel pipe, and the nut is tightened, th...

1. Ferrule type straight pipe joint (GB/T 3733-2008) 2. Ferrule type taper thread straight pipe joint (GB/T 3734-2008) 3. Ferrule type straight long pipe joint (GB/T 3735-2008) 4. Ferrule type tape...

Ferrule type pipe joint is a sealing pipe joint suitable for non corrosive or corrosive media such as oil, water and gas. The specification requirements of aluminum plastic pipe are flexible. After...

1. Avoid overweight. 2. Do not offset. 3. Regular maintenance, such as regular oiling, timely check the screws.

1. Turling bearing: Turling is a special engineering plastic, which is suitable for humid and corrosive places. Its rotation flexibility is general and its resistance is large. 2. Roller bearing: t...

1. Generally, the weight borne by the casters should be considered first when selecting a suitable wheel frame, such as supermarkets, schools, hospitals, office buildings, hotels and other places. ...

Wheel selection 1. Selection of wheel material: first, consider the size of the road surface used, obstacles, residual substances (such as iron filings, grease) on the site of use, environmental co...

It is mainly divided into super artificial rubber casters, Polyurethane casters, plastic casters, nylon casters, Steel casters, high temperature resistant casters, rubber casters S-type artificial ...